BOLT- ON INDUCTION Kits

Pipercross induction kits are among the best in the world. High quality construction, latest foam filter technology ensuring maximum performance at all times.

Get more power, increase air flow, sports sound, over 400 applications, washable and reusable...

Skoda Octavia Induction kit

 

 

 

 

 

150mm OD Rampipe Base

The Pipercross 150mm Outer Diameter base found on Pipercross Induction kits, Vipers, PX700 and Evolution is used to create laminar air flow.
Laminar air flow occurs when the air is flowing in the same direction and turbulence is kept to a minimum. Turbulence causes drag which slows the airflow down and limits the flow rate of any induction system.
Filter units without a full radius edge create turbulence, thus reducing their effectiveness.

Why Foam?

Pipercross induction kit At the heart of the unique pipercross air filter is a specially developed polyurethane foam which acts as the filtration medium, having both higher performance and life expectancy than paper.

Pipercross reticulated foam is created by a chemical reaction, it is then placed in a gas filled combustion chamber where a controlled explosion burns away any complete cell walls in the material to form a skeletal cellular structure which is strictly quality controlled. This process, which is specified by Pipercross ensures that the foam consists of tiny open cells which trap contaminants.

The cell size of the foam, its porosity, is measured in Pores Per Inch (PPI). Pipercross air filters use up to six layers of foam with varying porosity descending in pore size in the direction of air flow.

The Pipercross filters long life span is due to the dirt storage capacity of the foam cells and the filters construction which means no air passage is blocked until all the cells in a layer of foam are completely filled. It is designed to hold contaminants in the filters outer layer, inner layers act as a secondary measure to ensure an exceptionally high level of engine protection.


Pipercross Universal cone filters

 

 

 

                     

 

Caged Vector top/Rubber base filter

 

This range of high output filters has been developed to fit a number of injection systems.


Each universal cone incorporates a protective inner cage and a rubber necked base for maximum flexibility.

 

Pipercross rubber neck vector top cones are available in silver, red or blue.

 

Aluminum base / Chrome top filter / Vector design

This range of high output filters has been developed to fit a number of injection systems. Ideal for use in custom / one off induction systems, the PX700 consists of an aluminum spun neck and incorporates a full radius ram pipe bonded to a high performance air filter.

  • Spun alloy inlet

  • Lightweight

  • Available with Vector power cone

  • For use in universal applications

  • Increased air flow

  • Maximum torque

  • Maximum BHP

 

Universal Chrome top with adapters

 

The 7000-series filters use four moulded polyurethane neck reducers and a 150mm spun alloy base to maximize the number of fitments available from a single filter.

The PK7000 open cone utilizes Pipercross Vortex foam to give increased surface area and features a polished "PX" stamped end cap for great under bonnet looks.

Based on the popular Viper intake, the Venom 7000 uses a 75mm OD direct air feed system to supply cold air straight into the filter, with a powder coated alloy heat shield to keep under bonnet temperatures away from the cool air inside the intake.
The Venom uses a removable reverse-flow filter element to aid cleaning and servicing.

 

 

Each 7000-series filter includes:

 

 

                    

  • Spun alloy inlet with 88mm neck

  • 75, 70, 65 and 60mm PU neck reducers